How To Replace A Commercial Refrigerator Door Gasket

 

Steps

if you notice tear or cracks in the gasket, it is time to change.

soften the new gasket by soaking it in hot water, remember to dry wit ha tower after 5 to 10 minutes

remove the old gasket, some appliances would require you to remove the handle in order to remove the gasket. Please refer to your manual. 

clean the groove with warm water and mild detergent.

press the gasket dart into the grooves at the top corners

then press the gasket dart into the grooves at the bottom

then press the remaining grooves around the door

you are finished. please check around to ensure it is secured around the door.

Chinese:

如果您注意到密封条有撕裂或裂缝，是时候更换了。

将新的密封条浸泡在热水中软化，记得在 5 到 10 分钟后用毛巾擦干。

拆下旧密封条，有些电器可能需要先拆下把手才能拆除密封条。请参考您的使用手册。

用温水和温和的清洁剂清洁凹槽。

将密封条的凸缘先按入顶部角落的凹槽中。

然后将密封条的凸缘按入底部的凹槽中。

接着将密封条的其余部分按入门周围的凹槽中。

安装完成。请检查四周，确保密封条已牢固固定在门上